Battery module controller XL

Video battery module controller

A video of the new battery module controller XL will be placed shortly.

CS Tech video Module Controller (Engels)

    

This product can be ordered from and shipped to the United States, Canada and Australia. Shipping costs to these countries for one module are € 159,-.

More information here.

Battery module controller XL

1.695,00

Accumodule controller XL

Hardware

  • BPath BMS;
  • IP40;
  • 50 Ohm, 50 Watt pre-charge resistor;
  • 3.5 Inch Colour Touch Screen;
  • 18-53VDC power supply;
  • 500 Amp Gigavac contactor;
  • On/off button with colour LED ring;
  • 500 Shunt current measurement;
  • Suitable for connecting multiple parallel DC cables with a maximum diameter of 120mm² (AWG 4/0).

Functionality

  • Cell balancing for Tesla 6S modules from Model S/X (max 26 modules);
  • Balancing cell for BMW I3 modules 60/90/120 Ah (max 8 modules);
  • Balancing cell for Mitsubishi Outlander modules (max 10 modules);
  • Contactor tripping at high cell voltage or low cell voltage, high module temperature;
  • Error message high temperature, low temperature, high cell voltage, low cell voltage, too big a difference between cell voltages;
  • Preload;
  • State-off-charge indication. Readout via display and the LED ring changes colour from green to red depending on the filling of the battery;
  • Readout of the 6 cell voltages and the 2 temperatures in each Tesla module;
  • Readout of battery current and voltage;
  • BMS information via Canbus on Victron network: temperature, errors, SOC, voltage, current, highest cell voltage, lowest cell voltage;
  • Selection choice Celsius / Fahrenheit.

Extra functionality for Victron GX networks (this is not mandatory, the BPath BMS does not depend on a charger/inverter brand. It will balance the Tesla battery and switch off consumers/chargers in unsafe situations):

  • Temperature dependent charging current from Victron compatible chargers, low temperature low charging current. High temperature reduces the charging current;
  • Victron charging voltage adjustable from BPath BMS;
  • Storage mode, for the period when the battery is not used. Reduced charge voltage for extended life, for Victron compatible chargers.

Interfaces

  • Communication with Tesla Battery Monitoring Board;
  • CAN Bus communication with Victron GX chargers;
  • Potential free changeover contact for charge enable or SOC enable;
  • Heat enable, cool enable.

Additional information

Weight 4 kg
Dimensions 310 × 310 × 140 mm

Back to shop

Attention!

For a correct and safe operation, some products need to be supplemented with other products. This is indicated in the description.

Back to shop

Attention!

For a correct and safe operation, some products need to be supplemented with other products. This is indicated in the description.